Hardware-software systems to recover data from the majority of damaged storage media: SATA/PATA/USB HDD, SATA/PCIe (M.2 NVMe/AHCI, Apple SSD, PCIe x16) SSD, SAS, RAID, logically damaged USB Flash drives, SD/mSD cards.
PERFECTLY EFFICIENT FOR DIAGNOSTICS AND DATA RECOVERY
Use the PC-3000 Portable III to quickly and easily diagnose practically any type of storage media devices, find the reason for damage, make images and recover as much data as possible. And 2 active licenses for a desktop computer/ laptop along with a Standalone Mode to work without a host computer, allows you to arrange your workstation wherever you need it!
4 DIAGNOSTIC PORTS TO RECOVER EVIDENCE FROM 3 DRIVES AT THE SAME TIME
Connect your storage media directly via the PC-3000 Portable III source ports: USB, SATA, PATA, PCIe, NVMe
TARGET SATA1 AND SATA2 PORTS FOR DATA IMAGING TO DESTINATION DRIVES
In certain modes, you may also use them to increase to 3 the number of devices you deal with simultaneously. Max speed of SATA ports: up to 360 MB/s
HARDWARE WRITE PROTECTION TO ENSURE EVIDENCE INTEGRITY
HARDWARE WRITE PROTECTION TO ENSURE EVIDENCE INTEGRITYA special switch on the device blocks any alteration of data during the extraction or imaging with the source SATA0 and USB ports. When it’s turned on, a yellow LED lights up and indicates that the record block is activated.
LOGGING AND REPORTS GENERATION
View, save and print reports about the condition of drives you examine for further investigation. The detailed information in the report can help you to better understand the internal hardware status of the drive you deal with.
BREAKTHROUGH: M.2 PCIe NVMe SSD SUPPORT!
The world’s only solution to deal with damaged NVMe SSDs! Recover evidence when no one can: diagnose the condition of NVMe SSDs and extract data from such damaged devices thanks to a special universal M.2 PCIe NVMe SSD/M.2 SATA SSD adapter included in the delivery kit.
Technical Features
Form factor: External device (153,50х84х46,5 mm)
Interface type: USB3.0
Diagnostic ports: USB 3.0 (Host), Port 0 (PCIe / SATA), Port 1 (SATA), Port 2 (SATA)
Power adapter: 4-channel independent power adapter with protection from overvoltage and current overloading, with current and voltage measurements
Number of active licenses: 2 (to install the software on both a desktop computer and a laptop)
Power Supply: External AC / DC 19 V
Operating temperature range: 0-40°C thanks to the Climate Control System
Other: Non-Volatile Memory to keep log files with date, time (GMT), username and settings which can be used in the reports later on.
The built-in lithium power supply ensures uninterrupted operation of the century-old calendar and world clock (UTC).
System Requirements
- CPU: Intel Core i5 (4 cores, 4 threats) or AMD Ryzen 5
- RAM: 8 Gb
- 60 Gb of available disk space (for installation of software and HDD/SSD resources)
- USB 3.0 Type-A port for connection of PC-3000 Portable (an Intel xHCI HOST controller is recommended)
- USB 3.0 Type-A or USB 2.0 port for PC-USB-TERMINAL connection
- Operating system: Windows 7 (SP), 8, 10, x86, x64
- Widescreen Full HD 1920×1080 display
SUPPORTED DEVICES AND FILE SYSTEMS:
| SATA / PATA HDD (3.5″, 2.5″,1.8″) | Supported interfaces: | SATA (Serial ATA) and USB devices compliant with the Mass Storage Device specification, i.e. external USB 2.0/3.0 HDD and USB Flash drives with logical issues (File System corruption, deleted data). SSHD (Solid State Hybrid Drive). PATA (IDE) – via a special PC SATA-PATA adapter from ACE Lab which can be bought optionally. |
| Supported vendors: | Seagate, Western Digital, TOSHIBA, HITACHI / IBM (HGST), Samsung, Fujitsu, Maxtor, Quantum | |
| Supported capacities: | From 40 GB and more (without upper limit) | |
| SAS HDD / SSD (3.5″, 2.5″)* | Supported interfaces: | SAS (Serial Attached SCSI) |
| Supported vendors: | Seagate, Western Digital, HITACHI / IBM (HGST), Fujitsu | |
| Supported capacities: | From 80 GB and more | |
| SSD** | Supported interfaces: | SATA II/III M.2 PCIe NVMe and M.2 (NGFF) – via a special universal M.2 PCIe NVMe SSD/M.2 SATA SSD adapter included in the delivery kit mSATA – via a special SATA-mSATA adapter from ACE Lab which can be bought optionally Micro SATA, PATA, LIF, ZIF, Apple proprietary interface – via additional adapters from third-party vendors The Apple MacBook SSD M.2 NGFF PCI-e NVMe Macbook SSD 2013-2019 (12+16 pin) – via the PCIe NVMe/AHCI Adapter for Apple Macbook SSD from ACE Lab which can be bought optionally PCIe x1-x16 – via the PCIe x16 SSD Adapter from ACE Lab which can be bought optionally |
| Supported vendors: | OCZ, Corsair, Crucial, RunCore, A-DATA, G.Skill, Micron, Plextor, Intel, Samsung, Seagate, SanDisk, Kingston, Smartbuy, Silicon Power, PNY, AMD, Lexar, Transcend, Patriot, GoodRam, Kingspec, Toshiba, etc. More manufacturers are added with the updates | |
| Supported capacities: | From 32 GB and more (without upper limit) | |
| USB Flash*** | Supported interfaces: | USB devices that comply with the Mass Storage Device specification, i.e., external USB 2.0 / 3.0 Flash. SD/MicroSD Memory Cards via the special 2-in-1 Card Reader Adapter included in the delivery kit |
| Supported vendors: | A-DATA, Apacer, Corsair, Goodram, Kingston, Lexar, Samsung, Sandisk, Silicon Power, Smartbuy, Toshiba, Transcend, Verbatim and others | |
| Supported capacities: | From 256 MB and more (without upper limit) Up to 1 TB for SD/MicroSD Memory Cards | |
| RAID**** | Supported virtual RAID levels: |
|
| Files Systems | FAT, exFAT, NTFS, ReFS, HFS+, APFS, EXT2/3/4, XFS, F2FS, ReiserFS, BtrFS, VMFS, UFS1/2, ZFS, DHF4.1, WFS0.x (for video recorders) and virtual machine images | |
